the mill-pond is quiet, its surface dark and shadowed, and there does not seem to be much water in it.

It appears that the dominant tendency of Mann's early tales, however pictorial or even picturesque the surface, is already toward the symbolic, the emblematic, the expressionistic.

If many of the characters in contemporary novels appear to be the bloodless relations of characters in a case history it is because the novelist is often forgetful today that those things that we call character manifest themselves in surface behavior, that the ego is still the executive agency of personality, and that all we know of personality must be discerned through the ego.

The brush moves up and down and is small enough to clean every dental surface, including the back of the teeth.

In view of the increasing shortage of usable surface and ground water in many parts of the Nation and the importance of finding new sources of supply to meet its present and future water needs, it is the policy of the Congress to provide for the development of practicable low-cost means for the large-scale production of water of a quality suitable for municipal, industrial, agricultural, and other beneficial consumptive uses from saline water, and for studies and research related thereto.

This shelter could be built in regions where water or rock is close to the surface, making it impractical to build an underground shelter.

These are particularly suitable for regions where water or rock is close to the surface.

A Barrette Swiss pattern file is handy since its triangular shape with only one cutting face will allow you to work a surface without marring an adjoining one.

To measure the volume of one of the combustion chambers in the cylinder head, install the valves and spark plug in the chamber and support the head so that its gasket surface is level.

This is possible with water and other liquids that have a high surface tension.

This is done by measuring the distance from the surface on which the tire is resting to the center of the rear axle shaft.

This result suggests a very high temperature at the solid surface of the planet, although there is the possibility that the observed radiation may be a combination of both thermal and non-thermal components and that the observed spectrum is that of a black body merely by coincidence.

The infrared emission could then be assumed to originate at the surface of the moon, while the radio emission originates at some depth beneath the surface, where the temperature variation due to solar radiation is reduced in amplitude and shifted in phase.

The constant-temperature contours are much smoother than those observed at 4.3 mm by Coates ( 1959 ) and apparently the emission at 8 mm is not nearly so sensitive to differences in surface features.

The mean temperature of the surface was then computed according to the following relation: Af where x is the fraction of the plug area covered by the hot spot.

It is sufficiently small compared with the surface temperature of the anode holder, to make the energy flux radiated from the environment toward the anode holder negligible within the accuracy of the present measurements.

The radiation loss from the anode surface was computed according to Af where Af is the mean of the fourth powers of the temperatures Af and Af calculated analogously to equation ( 1 ).

The relative forces can be calculated from the various radii of curvature if we assume: ( A ) The surface tension is uniform on the surface of the drop.

Just as the pressure exerted by surface tension in a spherical drop is Af and the pressure exerted by surface tension on a cylindrical shape is Af, the pressure exerted by any curved surface is Af, where **yg is the interfacial tension and Af and Af are the two radii of curvature.

Generally, buon fresco works are more durable than any a secco work added on top of them, because a secco work lasts better with a roughened plaster surface, whilst true fresco should have a smooth one.

Generally, surface water works its way down to an average depth of around where it contacts hot rocks.

Generally it is preferred that only the upper surface with the vinyl is cut, but the backing surface is not completely cut through.

Generally, within the Closed Basin the major streams such as Saguache Creek, San Luis Creek, and the streams from the west face of the Sangre de Cristos flow only a short distance onto the valley floor as surface streams.

Generally several pseudopodia arise from the surface of the body ( polypodial-Amoeba proteus ) or a single pseudopodium may form on the surface of the body ( monopodial-Entamoeba histolytica ).

Generally, the form takes less than a week to prepare, after which a production rate of 1 – 10 units / hr · mold is achieved, with items as massive as and as small as with very good surface finish and close tolerances.

Generally, the user stands astride a board or log and swings the adze downwards towards his feet, chipping off pieces of wood, moving backwards as they go and leaving a relatively smooth surface behind.

The surface is Generally level the low Hemlock lands the soil is 3d rate the uplands 2d.

Generally, in very humid or undeveloped regions, the shape of the water table mimics the slope of the surface.

Generally, precipitation will fall to the surface ; an exception is Virga which evaporates before reaching the surface.

Generally it is a fixed volumetric fraction of the respiratory flow, but more complex systems have been developed which exhaust a close approximation of a ratio to the surface respiratory flow rate.

Generally, mining is either done from the surface or underground.

Generally, ignition systems try to apply flames across the injector surface, with a mass flow of approximately 1 % of the full mass flow of the chamber.

Generally, a control surface will contain one or more controls that can be assigned to parameters in the software, allowing tactile control of the software.

Generally, large current devices have large die and packaging surface areas and lower thermal resistance.

Generally, if the clinical history is consistent with Stevens – Johnson syndrome, and the skin lesion covers greater than 30 % of the body surface area, the diagnosis of TEN is appropriate.

) The braking force varies depending on the engine, but also what gear the vehicle is in ( Generally, the lower the gear, the higher the braking effect as long as the wheels continue to maintain traction with the road surface ).

Generally, if the player fails to follow a strict procedure ( for instance, checking if a guard returned the player's ID card, rather than someone else's ), the consequences will not surface until much later in the game.

Unlike Bulk micromachining, where a silicon substrate ( wafer ) is selectively etched to produce structures, surface micromachining builds microstructures by deposition and etching of different structural layers on top of the substrate .. Generally polysilicon is commonly used as one of the layers and silicon dioxide is used as a sacrificial layer which is removed or etched out to create the necessary void in the thickness direction.

Generally, a minimum tip-sample spacing is specified to prevent the tip from crashing into the sample surface at the 0 V tip-sample bias.

Generally, if the water contact angle is smaller than 90 °, the solid surface is considered hydrophilic.

The results of present observations of the thermal radio emission of the moon are consistent with the very low thermal conductivity of the surface layer which was derived from the variation in the infrared emission during eclipses ( e.g., Garstung, 1958 ).

A most useful tool for wetting the surface without running down was made from a greenhouse `` mist spray '' nozzle welded to a hose connection, to be used at low water pressure.

Needless to say, the organic load was very low on a volumetric basis, but was 270 lb BOD/day/acre on a surface loading basis.

This low BOD was due to removal of the excess suspended solids by sedimentation since the only dilution was surface runoff which was very low during this study.

Settled phosphors, as generally used in image intensifiers, have low optical contact with the substrate surface, hence Af shall be assumed.

The coffin stood on trestles in a corner of the long low dimly lit funeral parlor, on its dark shining surface the sheaf of white roses I had ordered.

In contrast with other continents, it is marked by the comparatively small area of either very high or very low ground, lands under occupying an unusually small part of the surface ; while not only are the highest elevations inferior to those of Asia or South America, but the area of land over is also quite insignificant, being represented almost entirely by individual peaks and mountain ranges.

The fox has a low surface area to volume ratio, as evidenced by its generally rounded body shape, short muzzle and legs, and short, thick ears.

They can cause flooding and damage in neighbourhoods, as the water flows over the surface towards a low point.

When surface to air missiles became capable of hitting high flying aircraft bombers, bombers used flight at low altitude to evade radar detection.

At sufficiently low temperatures, electrons near the Fermi surface become unstable against the formation of Cooper pairs.

Being homeothermic ( warm-blooded ) marine mammals, pinnipeds need a low surface area to body mass ratio.

In linear materials such as metals, and under low frequencies, the current density across the conductor surface is uniform.

The advantage of nitridization is that it can be done at low temperatures, it produces a very hard surface, and the process leaves some compressive residual stress in the surface, which is good for fatigue properties.

Low surface brightness dwarf galaxies are important sources of information for studying dark matter, as they have an uncommonly low ratio of visible matter to dark matter, and have few bright stars at the center which would otherwise impair observations of the rotation curve of outlying stars.

The reflection high energy electron diffraction ( RHEED ) technique uses the reflection of a beam of electrons fired at various low angles to characterize the surface of crystalline materials.

The two variations are coupled: the warm oceanic phase, El Niño, accompanies high air surface pressure in the western Pacific, while the cold phase, La Niña, accompanies low air surface pressure in the western Pacific.

As with all members of the deep-fried chip family, they are cooked twice, once at a relatively low temperature ( blanching ) to cook the potato, and then at a higher temperature to crisp the surface, making them crunchy on the outside and fluffier on the inside.

In low temperatures surface hoar can also be broken apart and blown across the surface forming yukimarimo.

The total surface is, and the total volume ( measured at the low water datum ) is.

Because of the large influx of fresh water from rivers, especially from the Neva River ( two thirds of the total runoff ), the gulf water has very low salinity – between 0. 2 and 5. 8 ‰ at the surface and 0. 3 – 8. 5 ‰ near the bottom.