the mill-pond is quiet, its surface dark and shadowed, and there does not seem to be much water in it.

It appears that the dominant tendency of Mann's early tales, however pictorial or even picturesque the surface, is already toward the symbolic, the emblematic, the expressionistic.

If many of the characters in contemporary novels appear to be the bloodless relations of characters in a case history it is because the novelist is often forgetful today that those things that we call character manifest themselves in surface behavior, that the ego is still the executive agency of personality, and that all we know of personality must be discerned through the ego.

The brush moves up and down and is small enough to clean every dental surface, including the back of the teeth.

In view of the increasing shortage of usable surface and ground water in many parts of the Nation and the importance of finding new sources of supply to meet its present and future water needs, it is the policy of the Congress to provide for the development of practicable low-cost means for the large-scale production of water of a quality suitable for municipal, industrial, agricultural, and other beneficial consumptive uses from saline water, and for studies and research related thereto.

This shelter could be built in regions where water or rock is close to the surface, making it impractical to build an underground shelter.

These are particularly suitable for regions where water or rock is close to the surface.

A Barrette Swiss pattern file is handy since its triangular shape with only one cutting face will allow you to work a surface without marring an adjoining one.

To measure the volume of one of the combustion chambers in the cylinder head, install the valves and spark plug in the chamber and support the head so that its gasket surface is level.

This is possible with water and other liquids that have a high surface tension.

This is done by measuring the distance from the surface on which the tire is resting to the center of the rear axle shaft.

This result suggests a very high temperature at the solid surface of the planet, although there is the possibility that the observed radiation may be a combination of both thermal and non-thermal components and that the observed spectrum is that of a black body merely by coincidence.

The infrared emission could then be assumed to originate at the surface of the moon, while the radio emission originates at some depth beneath the surface, where the temperature variation due to solar radiation is reduced in amplitude and shifted in phase.

The constant-temperature contours are much smoother than those observed at 4.3 mm by Coates ( 1959 ) and apparently the emission at 8 mm is not nearly so sensitive to differences in surface features.

The mean temperature of the surface was then computed according to the following relation: Af where x is the fraction of the plug area covered by the hot spot.

It is sufficiently small compared with the surface temperature of the anode holder, to make the energy flux radiated from the environment toward the anode holder negligible within the accuracy of the present measurements.

The radiation loss from the anode surface was computed according to Af where Af is the mean of the fourth powers of the temperatures Af and Af calculated analogously to equation ( 1 ).

The relative forces can be calculated from the various radii of curvature if we assume: ( A ) The surface tension is uniform on the surface of the drop.

Just as the pressure exerted by surface tension in a spherical drop is Af and the pressure exerted by surface tension on a cylindrical shape is Af, the pressure exerted by any curved surface is Af, where **yg is the interfacial tension and Af and Af are the two radii of curvature.

Generally, buon fresco works are more durable than any a secco work added on top of them, because a secco work lasts better with a roughened plaster surface, whilst true fresco should have a smooth one.

Generally, surface water works its way down to an average depth of around where it contacts hot rocks.

Generally it is preferred that only the upper surface with the vinyl is cut, but the backing surface is not completely cut through.

Generally, within the Closed Basin the major streams such as Saguache Creek, San Luis Creek, and the streams from the west face of the Sangre de Cristos flow only a short distance onto the valley floor as surface streams.

Generally several pseudopodia arise from the surface of the body ( polypodial-Amoeba proteus ) or a single pseudopodium may form on the surface of the body ( monopodial-Entamoeba histolytica ).

Generally, the form takes less than a week to prepare, after which a production rate of 1 – 10 units / hr · mold is achieved, with items as massive as and as small as with very good surface finish and close tolerances.

Generally, the user stands astride a board or log and swings the adze downwards towards his feet, chipping off pieces of wood, moving backwards as they go and leaving a relatively smooth surface behind.

The surface is Generally low and level apart is upland where the soil is 2d rate.

Generally, in very humid or undeveloped regions, the shape of the water table mimics the slope of the surface.

Generally, precipitation will fall to the surface ; an exception is Virga which evaporates before reaching the surface.

Generally it is a fixed volumetric fraction of the respiratory flow, but more complex systems have been developed which exhaust a close approximation of a ratio to the surface respiratory flow rate.

Generally, mining is either done from the surface or underground.

Generally, ignition systems try to apply flames across the injector surface, with a mass flow of approximately 1 % of the full mass flow of the chamber.

Generally, a control surface will contain one or more controls that can be assigned to parameters in the software, allowing tactile control of the software.

Generally, large current devices have large die and packaging surface areas and lower thermal resistance.

Generally, if the clinical history is consistent with Stevens – Johnson syndrome, and the skin lesion covers greater than 30 % of the body surface area, the diagnosis of TEN is appropriate.

) The braking force varies depending on the engine, but also what gear the vehicle is in ( Generally, the lower the gear, the higher the braking effect as long as the wheels continue to maintain traction with the road surface ).

Generally, if the player fails to follow a strict procedure ( for instance, checking if a guard returned the player's ID card, rather than someone else's ), the consequences will not surface until much later in the game.

Unlike Bulk micromachining, where a silicon substrate ( wafer ) is selectively etched to produce structures, surface micromachining builds microstructures by deposition and etching of different structural layers on top of the substrate .. Generally polysilicon is commonly used as one of the layers and silicon dioxide is used as a sacrificial layer which is removed or etched out to create the necessary void in the thickness direction.

Generally, a minimum tip-sample spacing is specified to prevent the tip from crashing into the sample surface at the 0 V tip-sample bias.

Generally, if the water contact angle is smaller than 90 °, the solid surface is considered hydrophilic.

The jetting, frothing surface of the river reached the level of the runoff.

All of the releases, however, are recorded at a gratifyingly high level, with resultant masking of any surface noise.

Its surface is gently undulating and has an elevation of about above sea level.

The Acropolis is located on a flat-topped rock that rises above sea level in the city of Athens, with a surface area of about 3 hectares.

When evaluating a coin, the following — often subjective — factors may be considered: 1 ) " eye appeal " or the aesthetic interest of the coin ; 2 ) dents on the rim ; 3 ) unsightly scratches or other blemishes on the surface of the coin ; 4 ) luster ; 5 ) toning ; 6 ) level of detail retained, where a coin with full details obviously is valued higher than one with worn details.

Until the mid-19th century, when the river was tamed by dams, levees, and other controls, the Nile in the vicinity of Cairo was highly susceptible to changes in course and surface level.

* Central composite design, an experimental design in response surface methodology for building a second order model for a response variable without a complete three level factorial

Its surface and shores are below sea level, Earth's lowest elevation on land.

Typically this point of convergence will be along the horizon, as buildings are built level with the flat surface.

Water-based surfaces are also less abrasive than the sand-based variety and hence reduce the level of injury to players when they come into contact with the surface.

His first aerodynamic experiments, an investigation of the air resistance of surfaces, was carried out by dropping the surface to be investigated together with a measuring apparatus down a vertical cable stretched between the second level of the Eiffel Tower and the ground.

It is an idealized equilibrium surface of sea water, the mean sea level surface in the absence of currents, air pressure variations etc.

In geodesy, point or terrain heights are " above sea level ", an irregular, physically defined surface.

The reference surface for orthometric heights is the geoid, an equipotential surface approximating mean sea level.

The height of falling water column maintains compression of the air in the top of the chamber, while an outlet, submerged below the water level in the chamber allows water to flow back to the surface at a slightly lower level than the intake.

lowest point: Indian Ocean 0 m ( sea surface level ), Wetar Basin in east of Banda Sea at-7, 440 m ( northwest of Tanimbar Islands & southeast of Ceram Island ), where subduction zone is

Using FieldTurf, the playing surface is roughly below ground level.

Before reaching Jordanian territory the river forms the Sea of Galilee, the surface of which is 212 meters below sea level.

Erosion along limestone shores, notably in the tropics, produces karst topography that includes a sharp makatea surface above the normal reach of the sea and undercuts that are mostly the result of biological activity or bioerosion at or a little above mean sea level.

In the first step the physical surface is modelled by the geoid, a surface which approximates the mean sea level over the oceans and its continuation under the land masses.