Typical N values with s in parenthesis are-4. 47 ( 1. 32 ) for electrophilic aromatic substitution to toluene ( 1 ),-0. 41 ( 1. 12 ) for electrophilic addition to 1-phenyl-2-propene ( 2 ), and 0. 96 ( 1 ) for addition to 2-methyl-1-pentene ( 3 ),-0. 13 ( 1. 21 ) for reaction with triphenylallylsilane ( 4 ), 3. 61 ( 1. 11 ) for reaction with 2-methylfuran ( 5 ), + 7. 48 ( 0. 89 ) for reaction with isobutenyltributylstannane ( 6 ) and + 13. 36 ( 0. 81 ) for reaction with the enamine 7.

Typical TAE installation is a multi-socket junction box with at least one N connector and one F connector socket in the box ( usually 2 N and one F connector, but up to 3 N connectors are possible ).

Typical nitrogen ( N ) content of senescent material in the fall is 0. 5 % N. Fertilizer nitrogen applications of about 5 kg N / hectare ( ha ) applied for each tonne of biomass removed is a general guideline.

Typical tensions for steel-string acoustic guitars with " light " tension strings are 10. 5 kgf ( 23. 3 lbf, 103 N ) to 13. 8 kgf ( 30. 2 lbf, 135 N ).

Typical crossover matrices follow this formula: an N × N banyan switch uses ( N / 2 ) log < sub > 2 </ sub > N elements.

Typical crossover matrices follow the formula: an N × N Banyan switch uses ( N / 2 ) log N elements.

Typical values for N and K are 20 and 2, respectively.

Typical initiators include any organic compound with a labile group: e. g. azo (- N = N -), disulfide (- S-S -), or peroxide (- O-O -).

Typical gate materials are SiO < sub > 2 </ sub >, Si < sub > 3 </ sub > N < sub > 4 </ sub >, Al < sub > 2 </ sub > O < sub > 3 </ sub > and Ta < sub > 2 </ sub > O < sub > 5 </ sub >.

* Typical measured forces are as low as 10 < sup >− 14 </ sup > N, with the spatial resolutions as low as 20 nm.

The city position is at Latitude 10 ° 13 ' N and Longitude 64 ° 37 ' W. Typical temperatures vary between.

< gallery caption =" Typical triaging systems " widths =" 250px " heights =" 180px " perrow =" 3 ">

Typical galaxies range from dwarfs with as few as ten million ( 10 < sup > 7 </ sup >) stars up to giants with one trillion ( 10 < sup > 12 </ sup >) stars, all orbiting the galaxy's center of mass.

Typical parameters would be 300-400 mV for < 1 ms across the membrane ( note-the voltages used in cell experiments are typically much larger because they are being applied across large distances to the bulk solution so the resulting field across the actual membrane is only a small fraction of the applied bias ).

Typical values are 320 – 380 m < sup > 2 </ sup >· kg < sup >− 1 </ sup > for general purpose cements, and 450 – 650 m < sup > 2 </ sup >· kg < sup >− 1 </ sup > for " rapid hardening " cements.

Typical values of Z < sub > 0 </ sub > are 50 or 75 ohms for a coaxial cable, about 100 ohms for a twisted pair of wires, and about 300 ohms for a common type of untwisted pair used in radio transmission.

Typical solutions are 2 parts FeCl < sub > 3 </ sub > to 2 parts water and 1 part nitric to 3 parts water.

Typical guests forming Type I hydrates are CO < sub > 2 </ sub > in carbon dioxide clathrate and CH < sub > 4 </ sub > in methane clathrate.

Typical specifications are < 5 ppm for water, oxygen, as well as other alkenes.

< font size = 2 > Typical of parts of rural Louisiana is this abandoned house in western Claiborne Parish .</ font size = 2 >

Typical notation is GL < sub > n </ sub >( F ) or GL ( n, F ), or simply GL ( n ) if the field is understood.

Typical emission rates for alpha reaction neutron sources range from 1 × 10 < sup > 6 </ sup > to 1 × 10 < sup > 8 </ sup > neutrons per second.

Hanes Cymdeithas yr Iaith Gymraeg < nowiki >'</ nowiki >, Gomer, 1998, ISBN 1-85902-594-3 p 257 </ ref > Typical actions include painting slogans on buildings owned by businesses, and other minor criminal damage .< ref >

Typical timesteps for classical MD are in the order of 1 femtosecond ( 10 < sup >− 15 </ sup > s ).

Typical NSS neurotransmitter transporters, which are Na < sup >+</ sup > and Cl < sup >-</ sup > ion dependent, take advantage of both Na < sup >+</ sup > and Cl < sup >-</ sup > gradients, inwardly directed across the membrane.

Typical median summer flow is between 200 and 300 m < sup > 3 </ sup >/ s, whereas during spring run-off, the median flow is 1050 m < sup > 3 </ sup >/ s, but the river could swell anywhere from a minimum of 400 to a maximum of 2400 m < sup > 3 </ sup >/ s.

Typical meats used for a Sunday roast are beef, chicken, lamb or pork, although seasonally duck, goose, gammon, turkey or ( rarely ) other game birds may be used .< ref >

Typical values of V range from around 20 for very dense flint glass, around 30 for polycarbonate plastics, and up to 65 for very light crown glass, and up to 85 for fluor-crown glass.

Typical values of MDR width are 32 and 64 bits, which would allow us to fetch, in a single step, either an integer or a real value.

Typical concentration values fall somewhere in this range and are tailored to produce the desired properties in the device that the semiconductor is intended for.

Typical values for a small glass bead thermistor are 1. 5 mW /° C in still air and 6. 0 mW /° C in stirred oil.

Typical E values are + 6. 2 for R = chlorine, + 5. 90 for R = hydrogen, 0 for R = methoxy and-7. 02 for R = dimethylamine.

Typical values vary from-0. 3V to-10V.

Typical values for are:

Typical memory hierarchy ( access times and cache sizes are approximations of typical values used for the purpose of discussion ; actual values and actual numbers of levels in the hierarchy vary ):

Typical magnification values for eyepieces include 2 ×, 5 × and 10 ×.

Typical values run from 16 pF / ft for an HDPE-foamed dielectric precision video cable ( e. g. Belden 1694A ) to 21 pF / ft for a solid PE dielectric cable ( e. g. Belden 8281 or Canare LV-77S ).

Typical values of liquid water path in marine stratocumulus can be of the order of 20-80.

Typical attack / parry values for a new character are in the range of 14 / 12 ( for fighters ) to something like 6 / 8 ( dedicated non-fighters, such as Tsa-priests ).

Typical values for I band ( 900 nm wavelength )

Typical values for audio are 8-bit, 16-bit, 24-bit, and 32-bit.

Typical values for core and cladding of an optical fiber are 1. 48 and 1. 46, respectively.

Typical values of critical static dv / dt are in the tens of volts per microsecond.

Typical values for capacitors and resistors between the gate and A1 / MT1 may be up to 100nF and 10Ω up to 1kΩ .. Normal TRIACs, except for low-power types marketed as sensitive gate, already have such a resistor built-in to safeguard against spurious dv / dt triggering.

Typical Java interpreters do not buffer the top-of-stack this way, however, because the program and stack have a mix of short and wide data values.

Typical values of membrane potential are in the range – 40 mV to – 80 mV.

Typical values of membrane potential range from – 40 mV to – 80 mV.