Typical values of V range from around 20 for very dense flint glass, around 30 for polycarbonate plastics, and up to 65 for very light crown glass, and up to 85 for fluor-crown glass.

Typical values of MDR width are 32 and 64 bits, which would allow us to fetch, in a single step, either an integer or a real value.

Typical concentration values fall somewhere in this range and are tailored to produce the desired properties in the device that the semiconductor is intended for.

Typical values for a small glass bead thermistor are 1. 5 mW /° C in still air and 6. 0 mW /° C in stirred oil.

Typical Ritchie N < sup >+</ sup > values ( in methanol ) are: 0. 5 for methanol, 5. 9 for the cyanide anion, 7. 5 for the methoxide anion, 8. 5 for the azide anion, and 10. 7 for the thiophenol anion.

Typical E values are + 6. 2 for R = chlorine, + 5. 90 for R = hydrogen, 0 for R = methoxy and-7. 02 for R = dimethylamine.

Typical N values with s in parenthesis are-4. 47 ( 1. 32 ) for electrophilic aromatic substitution to toluene ( 1 ),-0. 41 ( 1. 12 ) for electrophilic addition to 1-phenyl-2-propene ( 2 ), and 0. 96 ( 1 ) for addition to 2-methyl-1-pentene ( 3 ),-0. 13 ( 1. 21 ) for reaction with triphenylallylsilane ( 4 ), 3. 61 ( 1. 11 ) for reaction with 2-methylfuran ( 5 ), + 7. 48 ( 0. 89 ) for reaction with isobutenyltributylstannane ( 6 ) and + 13. 36 ( 0. 81 ) for reaction with the enamine 7.

Typical values are 320 – 380 m < sup > 2 </ sup >· kg < sup >− 1 </ sup > for general purpose cements, and 450 – 650 m < sup > 2 </ sup >· kg < sup >− 1 </ sup > for " rapid hardening " cements.

Typical values of Z < sub > 0 </ sub > are 50 or 75 ohms for a coaxial cable, about 100 ohms for a twisted pair of wires, and about 300 ohms for a common type of untwisted pair used in radio transmission.

Typical values for are:

Typical memory hierarchy ( access times and cache sizes are approximations of typical values used for the purpose of discussion ; actual values and actual numbers of levels in the hierarchy vary ):

Typical magnification values for eyepieces include 2 ×, 5 × and 10 ×.

Typical values run from 16 pF / ft for an HDPE-foamed dielectric precision video cable ( e. g. Belden 1694A ) to 21 pF / ft for a solid PE dielectric cable ( e. g. Belden 8281 or Canare LV-77S ).

Typical values of liquid water path in marine stratocumulus can be of the order of 20-80.

Typical attack / parry values for a new character are in the range of 14 / 12 ( for fighters ) to something like 6 / 8 ( dedicated non-fighters, such as Tsa-priests ).

Typical values for I band ( 900 nm wavelength )

Typical values for audio are 8-bit, 16-bit, 24-bit, and 32-bit.

Typical values for core and cladding of an optical fiber are 1. 48 and 1. 46, respectively.

Typical values of critical static dv / dt are in the tens of volts per microsecond.

Typical values for capacitors and resistors between the gate and A1 / MT1 may be up to 100nF and 10Ω up to 1kΩ .. Normal TRIACs, except for low-power types marketed as sensitive gate, already have such a resistor built-in to safeguard against spurious dv / dt triggering.

Typical Java interpreters do not buffer the top-of-stack this way, however, because the program and stack have a mix of short and wide data values.

Typical values of membrane potential are in the range – 40 mV to – 80 mV.

Typical values of membrane potential range from – 40 mV to – 80 mV.

Typical Kyrgyz families vary in their devotion to Islam.

Typical dosages of the crude herb vary from 2 – 10 grams per day.

Typical euphotic depths vary from only a few centimetres in highly turbid eutrophic lakes, to around 200 metres in the open ocean.

Typical velocities of APFSDS rounds vary between manufacturers and muzzle length / types.

Typical combat rigged rucksacks vary in weight from to well over.

Typical detention times for sedimentation vary from 1. 5 to 4 hours and basin depths vary from 10 to 15 feet ( 3 to 4. 5 meters ).

Typical career backgrounds vary, but, broadly speaking, venture capitalists come from either an operational or a finance background.

Typical dispersities vary based on the mechanism of polymerization and can be affected by a variety of reaction conditions.

Typical visibility requirements vary from one statute mile to five statute miles ( many countries define these in metric units as 1, 500m to 8km ).

Typical cloud clearance requirements vary from merely remaining clear of clouds to remaining at least one mile away ( 1, 500m in some countries ) from clouds horizontally and one thousand feet away from clouds vertically.

Typical reaction times vary from 1 – 10 hours at temperatures of 60-110 ° C.

Typical draft orders are DPDPDP, but may vary substantially between cases.

Typical treatment times vary from six months to two and a half years depending on the complexity and types of problems.

Typical skills vary widely, depending on race and disposition, but there's a lot of magical power to be found here, usually magic inherent to a given species.

Typical dimensions of these prints vary.

Typical latency periods vary from three days to two weeks after ingestion.

Typical off-peak frequency at the station is four trains per hour westbound to via, and, two trains per hour westbound to Clapham Junction and six trains per hour eastbound to but service intervals vary from about seven minutes during rush-hours to 30 minutes on Sundays.

Typical lengths vary from 25 to 65 cm ( 10 to 26 in ), and weights vary from 0. 3 to 3. 0 kg ( 0. 7 to 7. 0 lb ).

Typical examples, the Mexican song La Cucaracha and the Russian song Yablochko ( Little Apple ) have humorous ( often darkly humorous ) lyrics that come in easily remembered stanzas and vary highly from singer to singer.

Typical clutch size may vary between 50 and 250 eggs per female.

Typical widths are between 6 to 10 ft or 2 to 3 meters, typical lengths are between 12 and 20 ft or 4 to 7 metres, though table sizes may vary in size and form.