Typical values of V range from around 20 for very dense flint glass, around 30 for polycarbonate plastics, and up to 65 for very light crown glass, and up to 85 for fluor-crown glass.

Typical concentration values fall somewhere in this range and are tailored to produce the desired properties in the device that the semiconductor is intended for.

Typical values for a small glass bead thermistor are 1. 5 mW /° C in still air and 6. 0 mW /° C in stirred oil.

Typical Ritchie N < sup >+</ sup > values ( in methanol ) are: 0. 5 for methanol, 5. 9 for the cyanide anion, 7. 5 for the methoxide anion, 8. 5 for the azide anion, and 10. 7 for the thiophenol anion.

Typical E values are + 6. 2 for R = chlorine, + 5. 90 for R = hydrogen, 0 for R = methoxy and-7. 02 for R = dimethylamine.

Typical N values with s in parenthesis are-4. 47 ( 1. 32 ) for electrophilic aromatic substitution to toluene ( 1 ),-0. 41 ( 1. 12 ) for electrophilic addition to 1-phenyl-2-propene ( 2 ), and 0. 96 ( 1 ) for addition to 2-methyl-1-pentene ( 3 ),-0. 13 ( 1. 21 ) for reaction with triphenylallylsilane ( 4 ), 3. 61 ( 1. 11 ) for reaction with 2-methylfuran ( 5 ), + 7. 48 ( 0. 89 ) for reaction with isobutenyltributylstannane ( 6 ) and + 13. 36 ( 0. 81 ) for reaction with the enamine 7.

Typical values are 320 – 380 m < sup > 2 </ sup >· kg < sup >− 1 </ sup > for general purpose cements, and 450 – 650 m < sup > 2 </ sup >· kg < sup >− 1 </ sup > for " rapid hardening " cements.

Typical values vary from-0. 3V to-10V.

Typical values of Z < sub > 0 </ sub > are 50 or 75 ohms for a coaxial cable, about 100 ohms for a twisted pair of wires, and about 300 ohms for a common type of untwisted pair used in radio transmission.

Typical values for are:

Typical memory hierarchy ( access times and cache sizes are approximations of typical values used for the purpose of discussion ; actual values and actual numbers of levels in the hierarchy vary ):

Typical magnification values for eyepieces include 2 ×, 5 × and 10 ×.

Typical values run from 16 pF / ft for an HDPE-foamed dielectric precision video cable ( e. g. Belden 1694A ) to 21 pF / ft for a solid PE dielectric cable ( e. g. Belden 8281 or Canare LV-77S ).

Typical values of liquid water path in marine stratocumulus can be of the order of 20-80.

Typical attack / parry values for a new character are in the range of 14 / 12 ( for fighters ) to something like 6 / 8 ( dedicated non-fighters, such as Tsa-priests ).

Typical values for I band ( 900 nm wavelength )

Typical values for audio are 8-bit, 16-bit, 24-bit, and 32-bit.

Typical values for core and cladding of an optical fiber are 1. 48 and 1. 46, respectively.

Typical values of critical static dv / dt are in the tens of volts per microsecond.

Typical values for capacitors and resistors between the gate and A1 / MT1 may be up to 100nF and 10Ω up to 1kΩ .. Normal TRIACs, except for low-power types marketed as sensitive gate, already have such a resistor built-in to safeguard against spurious dv / dt triggering.

Typical Java interpreters do not buffer the top-of-stack this way, however, because the program and stack have a mix of short and wide data values.

Typical values of membrane potential are in the range – 40 mV to – 80 mV.

Typical values of membrane potential range from – 40 mV to – 80 mV.

Typical vinyl roll sizes are 24-inch, 36-inch and 48-inch width.

Typical radio control systems for radio-controlled models employ pulse width modulation ( PWM ), pulse position modulation ( PPM ) and more recently spread spectrum technology, and actuate the various control surfaces using servomechanisms.

< div style =" float: right ; width: 160px ; margin: 0 0 0 10px ;">< gallery > Image: Zeta_bootis_short_exposure. png | Typical short-exposure image of a binary star ( Zeta Bootis in this case ) as seen through atmospheric seeing.

Typical brushless inverters use a switched power supply pulse width modulation to generate an AC drive signal.

Typical bandsaw tooth dimensions are 1-3 / 4 " tooth space x 3 / 4 " gullet depth x 3 / 4 " gullet width ( grinding wheel width ) x 30deg face angle x 16deg back angle.

Typical lantern clocks comprised a square case on ball or urn feet, a large circular dial ( with a chapter ring extending beyond the width of the case on early examples ), a single hour hand, and a large bell and finial.

Typical widths can be 15, 18 or 20 ft. or 5 to 7 metres but their width can be limited, so that it is possible to transport them assembled, without having to pay for an oversize load.

Typical antipsychotics are not particularly selective and also block dopamine receptors in the mesocortical pathway, tuberoinfundibular pathway, and the nigrostriatal pathway.

Typical daily minima are around in the summer and in the winter.

Typical daily minima are around in the summer and in the winter.

Typical examples of binary operations are the addition (+) and multiplication (×) of numbers and matrices as well as composition of functions on a single set.

Typical inside directors are:

Typical genera include Aviculopecten, Posidonomya, Nucula, Carbonicola, Edmondia, and Modiola Gastropods are also numerous, including the genera Murchisonia, Euomphalus, Naticopsis.

* Typical modern six-string classical guitars are 48 – 54 mm wide at the nut, compared to around 42 mm for electric guitars.

Typical mathematical models of computers are the following:

Typical examples of exothermic reactions are precipitation and crystallization, in which ordered solids are formed from disordered gaseous or liquid phases.

Typical electrophiles are the carbon atom of carbonyl groups, carbocations or sulfur or nitronium cations.

Typical courses of Jiangsu cuisine are Jinling salted dried duck ( Nanjing's most famous dish ), crystal meat ( pork heels in a bright, brown sauce ), clear crab shell meatballs ( pork meatballs in crab shell powder, fatty, yet fresh ), Yangzhou steamed Jerky strips ( dried tofu, chicken, ham and pea leaves ), triple combo duck, dried duck, and Farewell My Concubine ( soft-shelled turtle stewed with many other ingredients such as chicken, mushrooms and wine ).

Typical examples are email systems, though they need to possess certain DBMS properties: email systems are built in a way that optimizes email messages handling and managing, and do not need significant portions of a general-purpose DBMS functionality.

Typical of the courses he teaches is his seminar " Group Theory and Galois Theory Visualized ", in which abstract mathematical ideas are rendered as concretely as possible.

Typical LC oscillator circuits are the Hartley, Colpitts and Clapp circuits.

The filter response can also be completely characterized in the frequency domain by its transfer function, which is the Fourier transform of the impulse response h. Typical filter design goals are to realize a particular frequency response, that is, the magnitude of the transfer function ; the importance of the phase of the transfer function varies according to the application, inasmuch as the shape of a waveform can be distorted to a greater or lesser extent in the process of achieving a desired ( amplitude ) response in the frequency domain.

Typical emulsions used in these techniques are nanoemulsions of soybean oil, with particles that are 400-600 nm in diameter.

Typical examples of entire functions are the polynomials and the exponential function, and any sums, products and compositions of these, including the error function and the trigonometric functions sine and cosine and their hyperbolic counterparts the hyperbolic sine and hyperbolic cosine functions.

Typical current conflicts are vastly different, characterised by ' war amongst the people ', the concept of a ' three block war ' and the presence of an asymmetric, 360-degree threat from irregular ( or extremist / terrorist ) combatants.

Typical cache " treasures " are not high in monetary value but may hold personal value to the finder.

Typical starch gel concentrations are 5 % to 10 %.

Typical distinctions are between states (" I owned "), activities (" I shopped "), accomplishments (" I painted a picture "), achievements (" I bought "), and punctual, or semelfactive, events (" I sneezed ").

Typical adult limits for these hormones are: TSH ( units ): 0. 45-4. 50 uIU / mL ; T4 Free / Direct ( nanograms ): 0. 82-1. 77 ng / dl ; and T3 ( nanograms ): 71-180 ng / dl.