[permalink] [id link]
Electrons in the conduction band may move freely throughout the material in the presence of an electrical field.
from
Wikipedia
Some Related Sentences
Electrons and conduction
Electrons excited to the conduction band also leave behind electron holes, i. e. unoccupied states in the valence band.
Electrons at these states can be easily excited to the conduction band, becoming free electrons, at room temperature.
Electrons within the conduction band are mobile charge carriers in solids, responsible for conduction of electric currents in metals and other good electrical conductors.
Electrons can gain enough energy to jump to the conduction band by absorbing either a phonon ( heat ) or a photon ( light ).
Electrons in the conduction band can respond to the electric field in the detector, and therefore move to the positive contact that is creating the electrical field.
Electrons and band
Electrons can take on any energy within an unfilled band.
Electrons are able to jump from one band to another.
Electrons can transfer from one band to the other by means of carrier generation and recombination processes.
Electrons are delocalized along the conjugated backbones of conducting polymers, usually through overlap of π-orbitals, resulting in an extended π-system with a filled valence band.
Electrons and may
Electrons emitted in this manner may be referred to as photoelectrons.
Electrons and move
Electrons emitted from the filament move several times in back and forth movements around the grid before finally entering the grid.
Electrons move quite long distances through proteins by hopping along chains of these cofactors.
Electrons will move to the left side ( uncovering positive ions on the right side ) until they cancel the field inside the metal.
Electrons can move quite freely between energy levels without a high energy cost.
Electrons then move spontaneously from donor to acceptor through an electron transport chain.
*“ Electrons move at the same speed whether at Intel or AMD .”
Electrons move according to the cross product of the magnetic field and the electron propagation vector, such that, in an infinite uniform field moving electrons take a circular motion at a constant radius dependent upon electron velocity and field strength according to the following equation, which can be derived from circular motion:
Electrons and material
Electrons which diffuse from the cathode into the P-doped layer, or anode, become what is termed " minority carriers " and tend to recombine there with the majority carriers, which are holes, on a timescale characteristic of the material which is the p-type minority carrier lifetime.
Electrons in such a vacancy tend to absorb light in the visible spectrum such that a material that is usually transparent becomes colored.
Electrons from the cathode collide with the anode material, usually tungsten, molybdenum or copper, and accelerate other electrons, ions and nuclei within the anode material.
Electrons and presence
Electrons behave as beams of energy, and in the presence of a potential U ( z ), assuming 1-dimensional case, the energy levels ψ < sub > n </ sub >( z ) of the electrons are given by solutions to Schrödinger ’ s equation,
Electrons and electrical
Electrons also conduct electric current through conductive solids, and the thermal and electrical conductivities of most metals have about the same ratio.
Electrons that are “ pulled ” from the zinc anode travel through the wire, providing an electrical current that illuminates the bulb.
Electrons and field
Electrons are the charge carriers in metals and they follow an erratic path, bouncing from atom to atom, but generally drifting in the opposite direction of the electric field.
Electrons are extracted from metal electrodes either by heating the electrode, causing thermionic emission, or by applying a strong electric field and causing field electron emission.
Electrons will be accelerated in the opposite direction to the electric field by the average electric field at their location.
Electrons are usually generated in an electron microscope by a process known as thermionic emission from a filament, usually tungsten, in the same manner as a light bulb, or alternatively by field electron emission.
Electrons exiting the source cavity are velocity modulated by the electric field as they travel through the drift tube and emerge at the destination chamber in bunches, delivering power to the oscillation in the cavity.
Electrons inside the blob travel at speeds just a tiny fraction below the speed of light and are whipped around by the magnetic field.
Electrons that have a velocity component that is parallel to the magnetic field will rather " stretch out " the circle and form helical paths, the pitch of which is subject to the rotation period and the parallel velocity component.
Electrons and .
Electrons that are bound to atoms possess a set of stable energy levels, or orbitals, and can undergo transitions between them by absorbing or emitting photons that match the energy differences between the levels.
Electrons form notional shells around the nucleus.
Electrons that populate a shell are said to be in a bound state.
# Electrons jump between orbitals in a particle-like fashion.
These he interpreted as " negative-energy electrons " and attempted to identify them with protons in his 1930 paper A Theory of Electrons and Protons However, these " negative-energy electrons " turned out to be positrons, and not protons.
Electrons in an s orbital benefit from closer proximity to the positively charged atom nucleus, and are therefore lower in energy.
Electrons ( the other major component of the atom ) are leptons.
Electrons were first discovered as the constituents of cathode rays.
Electrons can also be emitted from the electrodes of certain metals when light of frequency greater than the threshold frequency falls on it.
Electrons are responsible for emission of most EMR because they have low mass, and therefore are easily accelerated by a variety of mechanisms.
Electrons are at the heart of cathode ray tubes, which have been used extensively as display devices in laboratory instruments, computer monitors and television sets.
Electrons are bound by electromagnetic wave mechanics into orbitals around atomic nuclei to form atoms, which are the building blocks of molecules.
: Electrons are transferred from iron reducing oxygen in the atmosphere into water on the cathode, which is placed in another region of the metal.
Electrons flow in the external circuit.
Electrons flow from the source terminal towards the drain terminal if influenced by an applied voltage.
Electrons are drawn from the anode to the cathode through an external circuit, producing direct current electricity.
Electrons in this state are 45 % likely to be found within the solid body shown.
His most noted publication was the famous 1919 article " The Arrangement of Electrons in Atoms and Molecules " in which, building on Gilbert N. Lewis's cubical atom theory and Walther Kossel's chemical bonding theory, he outlined his " concentric theory of atomic structure ".
Electrons are particulate radiation and, hence, have cross section many times larger than photons, so that they do not penetrate the product beyond a few inches, depending on product density.
Electrons that belong to different molecules start " fleeing " and avoiding each other at the short intermolecular distances, which is frequently described as formation of " instantaneous dipoles " that attract each other.
Electrons and how they interact with electromagnetic fields are important in our understanding of chemistry and physics.
0.201 seconds.